45Pa MERV 8 Air Purifier Filters For Pharmaceutical Processing

Synthetic Air Purifier Filters For Pharmaceutical Processing / Aerospace Engineering


Competitive Advantage:

• Low maintained pressure drop for longer filter life
• High wet-strength beverage board frame creates a rigid and durable enclosure
• Welded wire media backing to maintain radial pleat configuration
• Available in 2" and 4" depths
• Excellent choice for those who change filters based upon time or PM program

Structure: The two-layer die cut cardboard or aluminum alloy frame

combines with the filter media to form the simple and strong structure. Meanwhile, the filter adopts a V-shape pleated structure, the material usage is three times greater than common air filter, so the dust holding capacity is greater.

Filter paper: Special blended by non-woven fabrics and synthetic fibers with a fluffy structure, large dust holding capacity and low initial resistance

Filter media: The filter media is closely combined with the protection grid and processed into a contour, equal spacing filter pleat layer by special process, allowing the air to pass freely and evenly, so that the dust can be uniformly adsorbed on the entire media, thereby achieving high dust holding capacity.

Protection grid: The grid is a galvanized grid or wire grid to increase the strength of the filter pleats, effectively weakens the pleat jitter during use, thereby reducing secondary pollution.

Cardboard frame: High-strength waterproof cardboard, each intersection and the filter media are closely connected, which enhances the filter's robustness and helps to maintain the flatness of the pleated filter media and the balance of the pleat spacing.

Aluminum alloy frame: 1.00mm thick aluminum profile enhanced by double-sided or single-sided galvanized protection grid support, can be repeatedly cleaned.

Applications:

Used as first stage filters in air condition system

1. Clean rooms ( suitable for use in multilayer filter filtration system or micro component electronic manufacture & assembly)

2. Food processing industry.

3. Pharmaceutical Processing

4. Aerospace Engineering

5. Genetic & Biological research

6. Biohazard Atmosphere

7. Laminar Flow Workstations

8. Bio Safe Hoods(Biological Safety Cabinets)

9. Hospital Operating Theaters & Intensive care units

10.Atomic Research

11.Electronic, medicament,food.

Parameters:

• Media: Progressive density Synthetic fibre
• Frame: Water-resistance cardboard; GI; AI
• Efficiency: MERV 8 ASHRAE 52.2
• Average Arrestance: 80% @0.5μm;95%@0.5μm;
• Initial resistance: 45 Pa
• Recommended final pressure drop : 250Pa
• Humidity resistance: 90%RH
• Max Temperature: 80 ℃
• DIN 53438 Flammability: F1
• UL 900 Standard : Class 2
• Max.air flow rate: 125% of rated air flow
• Media color available: Blue; White; Green
• Filter standard depth available 1 inch (21mm); 2 inch(46mm) and 4 inch(96mm)
• Galvanized supporting grid to ensure strength construction in diamond or square shape.

Specifications: